Baldwin Brass Polished Brass Door Knocker
Brass door knocker – The Baldwin Hardware Company manufactures a wide range of polished brass items for the home, including signs for doors, handles and door knockers. The polished brass door knockers are available in a variety of styles. And from contemporary to classic and are design to withstand time and weather conditions. Install a polished brass door knocker requires some basic tools including a drill, bits, screwdriver, level, ruler. Always wear safety glasses when using power tools.
Use a pencil to mark the desired location for the brass door knocker. Consider the height of the average person, and hang knocker approximately four or five meters from the ground and centered in the middle of the door. and locate desired bolt circle for the knocker, using a ruler to determine the center of the door. Then check the screw holes with a level to ensure that they are in a straight line and mark with a pencil when you have determined the right place.
12 Photos Gallery of: Baldwin Brass Polished Brass Door Knocker
As a result drill holes for screws. Then set knock over the holes. Insert and tighten the screws. The Baldwin polished brass door knocker should now be in place. Use screw anchors, are available at most home repair or hardware stores, if the door is filled or whiner seems solved. Then place the screw anchors into the holes in the door. And put the Pats over the holes and insert the screws. Finally the anchor will expand to hold the screw in place.baldwin brass door knockers