Easy Installing Door Knocker With Peephole

Home » Door » Easy Installing Door Knocker with Peephole

Door knocker with peephole – Guests lift flaps and brings it down to door. Making a sharp knocking sound that is hard to overlook. It is important to install your door knocker correctly, though, or you may end up damaging your door, you rely on for safety. Installation of a door knocker on a standard wooden entrance door is usually straightforward. First, Stand in front of your door and determine at what level you want to hang door knocker.

Posted on February 15, 2017 Door With 0 comments

Then, Place it in middle of door at around your shoulder level. Not installing door knocker with peephole over glass peephole that allows you to see your visitors from inside before opening front door.  And then, Hold hammer in place of door and mark location with light pencil marks. Mark places where you want to insert screws as well. Remove hammer from face of door and ensure that you can still clearly see marks you made.

12 Photos Gallery of: Easy Installing Door Knocker with Peephole

RELATED TOPIC :   Polished Brass Door Knockers

Next, Step back and take a good look at place you choose. Most door knocker with peephole requires screws to anchor them in place, make sure you like location before you begin to install hammer. If you change your mind about location half way through installation process, you ugly holes to deal with.  Using a drill and a little bit to make starter holes for screws, about 1/2 inch deep. Twist screws in starting holes about a quarter of an inch, and then screw them.

Tags: brass door knocker with peephole, door knocker with peep hole, door knocker with peephole, front door knockers with peephole, how to install a door knocker, installing peephole in door, where to place a door knocker