Elegant Faucet Knobs Design

Home » faucet » Elegant Faucet Knobs Design

Faucet knobs – As soon as we withdraw our hands the water will stop flowing automatically. Over time you will notice the large amount of water you will be saving in your home. Here are the steps to install an automatic faucet. Its installation process is very similar to that of a conventional faucet . First we have to cut off the water supply. And then put the faucet in the hole in the sink . And fix it with a washer and a hex nut.

Posted on October 9, 2017 faucet

Then, We will connect the hose to the faucet knobs and focus on the control box, which will be located under the sink . This device usually works with four batteries that will fit correctly respecting the polarity. Using a strip or double-sided adhesive tape, we stick the box to the wall.

12 Photos Gallery of: Elegant Faucet Knobs Design

Vanity Faucet KnobsSize: 1000 x 1000

Faucet Knobs WallSize: 1000 x 1014

Faucet Knobs RepairSize: 1280 x 720

Faucet Knobs ModernSize: 800 x 800

Faucet Knobs ModelsSize: 800 x 763

Faucet Knobs LedSize: 900 x 900

Faucet Knobs InstallSize: 1280 x 960

Faucet Knobs GlassSize: 1000 x 1000

Faucet Knobs FixtureSize: 1186 x 802

Faucet Knobs ChromeSize: 800 x 800

Black Faucet KnobsSize: 1000 x 999

Bathroom Faucet KnobsSize: 1000 x 1000

RELATED TOPIC :   New Faucets for Vessel Sinks

When we have finished connecting the faucet knobs to the valve , then we have to screw a flexible tube into the water inlet and hook it to the entrance of the device. To complete the installation of the automatic faucet in our sink, we will only have to insert the cable into the mechanism and once we open the stopcock we can check if the installation works properly and if we have done the work properly.