Ideas To Install Outside Showers
Outside showers – Many people install outdoor showers next to their swimming pools or spas. You can buy a pre-made shower kit complete with everything you need, apart from the waterline and concrete substrates. An outdoor pool shower allows you to shower the chlorine off your body when you get out of the pool. When you have on your swimsuit, there is no reason to privacy walls.
How to install outside showers, paint a straight line from the location where you want to enter home with your waterline to the location where you want to install the shower. Using marking paint to use the line to ground. This painted line gives you a reference point as you dig your ditch. If necessary, use a jack hammer to break away any concrete if you plan to install the shower on the pool terrace. Remove a 12-inch wide span of concrete that extends from the edge of the concrete patio to the location where you want to place the shower. Dig a hole that follows the straight line deeper than the frost line in your area. You can refer to your building codes for the proper depth. Normally, 24 inches work. You can use a shovel or backhoe to dig the trench.
12 Photos Gallery of: Ideas to Install Outside Showers
After that to install outside showers, dig out of a 24-inch-square hole around the area where you want to install the shower if you did not bust up concrete. The site will serve as a concrete base for the shower. A 24-inch square will suffice, but you can make the space as large as you want. If you place the shower in the patio area. And you will just fill the area where you removed the concrete. So there is no need to make the area larger.