Installing Ada Grab Bars

Home » Hardware » Installing Ada Grab Bars

Ada grab bars – If you or someone in your family has trouble getting around in the bathroom, consider installing a grab bar. A ada grab bars can make it easier to get in and out of the shower or stand up after using the toilet. Regardless of where you choose to install, make sure there are studs behind the wall so that it will not pull out when Disabled grabs the bar.

Posted on February 26, 2017 Hardware With 0 comments

Instructions

Mark the spot where you want to install the handle. For private homes, you can install the bar at any height you choose. As a general rule, install the bar where the disabled elbow meets the wall. Use a stud finder or tap the wall with a hammer to locate the studs. If you hear a hollow sound when you press, you are between two studs. You will hear a more solid sound when you reach one of the wall studs.

13 Photos Gallery of: Installing Ada Grab Bars

Ada Grab Bars WhiteSize: 680 x 680

Ada Grab Bars WhiteSize: 680 x 680

Ada Grab Bars ToiletSize: 736 x 981

Ada Grab Bars SpecsSize: 900 x 900

Ada Grab Bars RevitSize: 680 x 680

Ada Grab Bars LowesSize: 750 x 750

Ada Grab Bars HeightSize: 800 x 800

Ada Grab Bars GoldSize: 800 x 800

Ada Grab Bars CurvedSize: 680 x 680

RELATED TOPIC :   Best Vertical Toilet Paper Holder

Hold the ada grab bars up to the place that you have marked on the wall and mark the exact placement of the screw holes. Set the bar back and use a drill to make holes according to your selections. Apply a small amount of silicone caulk to each borehole if you install grab bars in the shower. This will create a watertight seal when inserting the screws for the grab bar. Hold the grab bar up to the wall again and insert the screws. If you install the bar in a shower, using stainless steel screws so they do not rust. Attach the cover of your support handle has one.

RELATED TOPIC :   Double sink 72 inch bathroom vanity

Tags: ada grab bars height, ada grab bars toilet, height of ada grab bars