Installing Curtain Rods For Corner Windows
Installing curtain rods – Install curtains on the corner window is tricky because there is not much space between each window and corner. You can install corner curtains by means of a contact, however. This provides a smooth, even look to the window. Pocket curtains work best for this project.
Installing curtain rods for corner windows connect the brackets by sliding metal and plastic bracket pieces together. They fit together properly. Measure your curtains including curtain rod pocket. Decide where you want the curtains to end, for example, at the bottom of the window sill or on the floor. Screw the brackets to the wall at the desired height by measuring from the ideal curtain height. Use screws that are appropriate for the wall material or screws for plaster and masonry bolts for masonry. If you cannot find a stud to screw in, use the drywall anchors with your screws.
12 Photos Gallery of: Installing Curtain Rods for Corner Windows
After that to installing curtain rods for corner windows, attach a center console near the corner. Then make sure all the brackets are adjusted, using a level. Set rods on the floor and slide them so they are adapted to the approximate length needed. Slide each end of the rod in the end caps. Attach a corner connector to the middle end of each rod and connect to piece together. Hook the middle of the center console. Enter curtain rod curtain pocket until it’s neatly place. Chin curtain rod on the wall bracket by tilting ports, hooking it on the bracket hook and push it into place. It is easier to put the curtain rod to the brackets by means of a second person.installing curtain rods