Installing Rustic Shelf Brackets

Home » Hardware » Installing Rustic Shelf Brackets

Rustic shelf brackets – The installation begins with keeping the shelf where you want it to go, and place the light pencil markings at each end of the shelf. There is usually never enough storage in a home or garage, but this is a problem that can be easily remedied. Install the mounting shelves is an easy way to add much needed storage for a pantry, bathroom or garage. Put up shelves using drywall anchors to be sure that they are safe.

Posted on February 28, 2017 Hardware With 0 comments

Measure rustic shelf brackets. Mark your walls so that the brackets are level and smooth. Make pencil marks on the desire location where the brackets can install on plaster with an anchor. Select heavy drywall anchors to hold up the shelves for the pantry, garage or other heavy storage areas. Look for pounds of weight each anchor holds, listed on the packaging. A good heavy drywall anchors to hold about 90 pounds.

12 Photos Gallery of: Installing Rustic Shelf Brackets

RELATED TOPIC :   Tips Installing Standard Bathtub Dimensions

And then use drywall anchors that can drill directly into the wall. Attach a hand drill with Phillips to the anchor and slowly drill into the wall in the right position. Then, hold the rustic shelf brackets in place for all the anchors are installed. Use a screwdriver to fasten the screws in drywall anchors through the brackets.

Tags: metal rustic shelving, rustic shelf brackets, best shelf brackets, rustic brackets, rustic shelving brackets