How To Make Wooden Towel Rack
Wooden towel rack rails are an attractive option to conveniently hang your towels. These towel rails take in a wide range of styles from traditional to modern. It is possible to buy a towel rack, but you can easily make your own as a DIY carpentry project. Make a timeless towel rack for your bathroom with a beautiful hard wood like maple, cherry or walnut. A simple towel rail with clean lines works well with any home decorating style.
Lay the 4-by-2-by-36-inch flat joint on a work surface. Then, measure one end of the board using a tape measure and mark the board in 2, 6, 18, 30 and 34 inches with a pencil. This is the back for the wooden towel rack. Set the fence on a drill press to drill the center of a 2-inch wide board. And then insert a 1-inch drill bit into the drill.
12 Photos Gallery of: How to Make Wooden Towel Rack
A drill press has an adjustable backrest that called a fence. Loosen the knobs on the fence and slide it along the table or flat surface on the drill press until it is aligned to drill a 1-inch hole in the front of the fence. Tighten the turn knobs once you have them in the correct place on the drill table. Place your back on the drill table with the measure of the pencil mark towards. Then, drill a 1-inch diameter hole to the back into the 6-, 18- and 30-inch pencil marks with the drill. These are the holes for the tacos.