How To Place A Shower Curtain Rods
Shower curtain rods – Sometimes we have to put a shower curtain rod-shaped curved. The first thing you have to do is take the measure of the shower to adapt the supports. We move the measure to the bar and cut at both ends of it, respecting the curve. To make this work we will use the miter box and saw arc with sheet metal.
We put on the tiles, where we will put the bar, strips of masking tape so they do not slide the drill bit when drilling. Then present the brackets on the wall and mark the fastening points. After that, put an envelope on the wall to spot the drilling and drilled holes with the drill at slow speed without percussion at the beginning of the work. This holes to hanging shower curtain rods.
12 Photos Gallery of: How to Place a Shower Curtain Rods
The next removed the tape, we introduce the plugs and screwed the brackets to the wall. Then connect the two pieces that make up the bar, we introduce into the brackets and adjust with the screws fastening. Finish the work by placing the curtain in the bar with their corresponding washers. In this simple way, we will have finished placing a shower curtain rods. So, finally I say to you happy decoration guys!