Quick Installations Exterior Door Knobs
Exterior door knobs – Installation of a new door knob on an exterior door is a simple project. There is only one difference in installation of exterior door handle from interior door handles. This difference is screws holding latch in place. screws are an extra precaution to make it more difficult to remove door handles. When you install an exterior door knob, always make sure that keyhole is out and screws are in.
First, Insert exterior door knobs and lock piece into small hole on edge of door. Latch should be position so that curved side facing interior of house. Second, insert two screws into holes on front of lock piece. There is a hole above lock, and under it. Tighten screws with a screwdriver to hold lock in place.
12 Photos Gallery of: Quick Installations Exterior Door Knobs
Next, set door handle with keyhole through door from outside. Push reverse button through from inside, so that two buttons are close together and are flush with door. Then, Insert two screws through holes on inner side of exterior door knobs. Tighten screws with a screwdriver. And then, Place strike plate on doorjamb. Position it so lock fits into it when door is closed. Last, Screw plate to doorjamb with two screws.