Remove The Bathtub Stopper With Basic Tools
Bathtub stopper – After continued use, the bathtub drain plugs are not close all the way. Allow water to escape down the drain or may not open completely, hold water. That will hold water because of a mechanism in the plug is broken or damage. If the bathtub stopper does this, it may need to remove and replace. While there are five different types of bathtub drains: turn up, piston, foot locks, roller ball and lift and turn.
The plug is a roller ball if it has a trip lever and a foot switch if the plug has a smooth surface and has a handle in the middle. If it has a handle in the center, it is a roller-ball sewer. In a like manner, the lift and turn sewage also has a handle but requires you to turn off the switch from side to side to pull it out. It is possible to remove the bathtub stopper you with basic tools.
12 Photos Gallery of: Remove the Bathtub Stopper with Basic Tools
Therefore the first find the screws on the trip lever on the plug is a piston drain. Plunger drains do not have a visible clot as popup drain. The bathtub stopper has inside the tube and not in the drain opening. Loosen the screws that secure the lid to the trip lever with a flathead screwdriver. Remove the cover plate from the lever with your hands. Grasp the lever out of the tube with needle nose pliers because with this tube drainage, is plug in the tube. The last guideline is pulling the lever out of the drain.bathtub stopper types, how do i remove a bathtub stopper, lift and turn bathtub stopper, types of bathtub stoppers