Category: kitchen

How To Install A Stove Hoods

Home » kitchen

Stove hoods – Most common household kitchens are equipped with a fan. One of the most effective ventilation in the market, an oven extractor fan. A stove hoods place over the stove, so the fan can suck in hot air, smoke and cooking odors. The fan can then either send air through a filter and then back into the kitchen, or it may filter it and send it out of the house via a duct.

Turn stove hoods head. Using a wrench or screwdriver, remove the bottom cover and filter. Then hammer out knock-out holes that you want to use for ventilation and power lines. Screw channel plug-damper in the hood and make sure that the opening gives you enough room to move it from side to side when mounted in the wall. Measure 24 inches up from the stove, and then select a line with a pencil. Turn off all power to the kitchen; turn off the circuit switched on the house breaker box.

13 Photos Gallery of: How to Install a Stove Hoods

White Stove HoodsSize: 1500 x 1500

Top Stove HoodsSize: 1600 x 1200

Stylish Stove HoodsSize: 1500 x 1500

Popular Stove HoodsSize: 1000 x 720

Nice Stove HoodsSize: 990 x 660

New Stove HoodsSize: 1280 x 1024

Modern Stove HoodsSize: 990 x 666

Famous Stove HoodsSize: 1024 x 768

Best Stove HoodsSize: 800 x 600

Awesome Stove HoodsSize: 1280 x 960

To install a stove hoods, cut the area you marked on the wall where the ventilation duct will go through drywall saw. The end holes drilled to the outside of the housing, by means of a pencil. And to make a cutting guide line. Cut lines with the jigsaw that goes from one hole to the next to make a space for the channel to fit into the wall. Apply silicone caulk to the bottom of the wall ceiling. And then slide the wall cap through the outer wall and fit it into the channel plug-damper. Next, place duct tape around the assembled parts to seal them off. When finished, screws in the wall cap of external cladding.

Bridge Kitchen Faucets – Functional And Modern Faucet Designs

Home » kitchen

Bridge kitchen faucets are the design of a great idea to get some supplies replicate into your kitchen decor. They are modern and yet provide some sort of a classic touch to the entire kitchen. Here are some of the famous kitchen bridge faucets are available in the market.

One bridge kitchen faucets is the most popular of the collection of American Standard. These brands have a double-top-mount faucet handles the unique bridge of a series Culinaire them. This design is complete with blackened bronze and is available for around 500 dollars. It features brass faucet spout that rotates in all directions, and porcelain lever handle is ideal for everyday use. They are also resistant to corrosion and tarnish. And did not look tired even after prolonged use. Durable brass construction provides reliable equipment.

12 Photos Gallery of: Bridge Kitchen Faucets – Functional and Modern Faucet Designs

The Bellevue bridge kitchen faucets are another item that is amaze when it comes to the kitchen sink fixtures. This has created a brass sprayer with matching metal handle lever. Durable faucet entirely made of solid brass and is equipt with swing spout hook and 8-inch centers. Drain range is up to 9 inches, and a height of about 13 1/2 inches. The sculpt grip lever with ball finials lead. Hand sprayer reliable and has a synthetic polymer trigger thumb.

Choosing Your Black Cast Iron Kitchen Sink

Home » kitchen

In the past there are relatively few options when it comes to Cast iron kitchen sink. But today, thanks to improvements in technology there are a wide variety of different materials and even colors. Black kitchen sinks in particular are gaining popularity as consumers realize that by installing one they can instantly change the look of their kitchen. Here is a quick guide to help get you started when shopping for one.

How it will be installed is an important consideration when buying cast iron kitchen sink whatsoever. But when it comes to people who are black, many people prefer to be installed under the table. It’s called when installed undermount and certainly should be done by a professional. A black undermount kitchen sinks because it has no visible edge and can create a seamless look smooth and natural transition from your desk.

12 Photos Gallery of: Choosing Your Black Cast Iron Kitchen Sink

If you have more to spend, the black cast iron kitchen sink is the most luxurious. Granite-like rock very hard and durable and sinks made of it was early, the heat, stain and chip resistant. For this reason it has also become very popular for use in the bathroom as well. Another option that is just as solid but not as expensive is black cast iron kitchen sink.

 

A Fantastic Choice With Undermount Kitchen Sink Reviews For Your Cooking Area

Home » kitchen

Undermount Kitchen Sink – Kitchen sink gives you a leak-free service lifetime. Undermount kitchen sink seized in position with a metal attachment fixed to the bottom of the rock with a two-part process objects quickly and has the power of rigid unreasonable. The sink also includes valves for water inlet and outlet arrangements. These sinks only slim in nature and looked beautiful with fine leather, easy to maintain and has a great finishing touch.

Undermount kitchen sink gives flavor and lasting impression precedent era as the age of retro. They called the apron sink for the reason that of falling apron chic as from conventional. They are available in an elegant cast iron and stainless steel. This sinking is currently fashionable in new buildings as well. Ordinary kitchen can be transform into an empire with such a neat. Modern and pioneering kitchen sinks. There compound sinks that excel in quality are temperature resistant and scratch resistant.

12 Photos Gallery of: A Fantastic Choice with Undermount Kitchen Sink Reviews for Your Cooking Area

Undermount Kitchen SinkSize: 1024 x 688

Artificial stone undermount kitchen sink also stand out in marble and also in soapstone. They are also available in veneer bronze and brass and copper veneer ADDITIONAL however. This needs attention because there is the risk of losing its glittering surface. Endurance sank a good and reliable. They will give your kitchen a modern-day look. The diversity in the sink so outstanding that you can always have what you want to suit your passion. The most important point about this undermount sinks is that they do not develop stains or do not break when heavy goods that plunge into your sink.

 

 

How To Install Kitchen Soap Dispenser

Home » kitchen

Kitchen soap dispenser – Many do-it-yourself projects can be confusing for less than practical homeowner. But there are some who, when given the appropriate measures can save time and money to manage a professional. Follow these steps to make the sometimes difficult process to install kitchen soap dispenser less involved and easier to understand.

Start by removing the old drainage parts. You can do this by starting with p-trap using channel lock pliers. Place a small bucket under the p-trap to catch water that may spill when you remove the p-trap from the tube. If you have a dishwasher, be sure to disconnect the hose connected to the kitchen soap dispenser. Simply loosen the nut on the clamp holding the hose in place. Continue to tighten the remaining nuts on the drain pipe by means of channel lock pliers.

12 Photos Gallery of: How to Install Kitchen Soap Dispenser

Again, using the channel lock, delete the old folder from the sink by loosening the nut on the bottom of the basin. Pull the old basket valve through the hole and remove all old putty from the kitchen soap dispenser. Before you put the car through the hole in the sink. And apply some plumbers putty around the bottom lip of the basket. Pull the basket through the bore. And then screwing the nuts in place to pull the basket to sink. Then, flattening the glue in place to create a seal. Part of putty can seep into the sink. If this happens, just wipe away.

Warm And Wonderful Travertine Backsplash

Home » kitchen

Travertine backsplash provide a warm and textured accent for your kitchen and also bathroom. Travertine is a soft and pockmark form of limestone with motley band of various white, gray, brown, gold and / or red hues. This requires a thick sealant, are normally use for the installation. To fill pockmarks and create a smooth surface. Travertine tends to be too soft for use as a kitchen table. So it is important to match the stone with a free countertop material.

Broken pieces of travertine and tile form a colorful contrast to the rustic backsplash and counter design. Countertops made up of shards of rich browns . And then rust tile pairs well with a tan and cream stripes travertine backsplash. Use a thick band of the tile to trim the top of the backsplash for a finished look. Match the tiles with any type of natural wood cabinetry.

12 Photos Gallery of: Warm and Wonderful Travertine Backsplash

Travertine BacksplashSize: 990 x 660

Take advantage of the many different types of travertine backsplash to create a colorful backsplash in your kitchen or bathroom. Assorted square travertine tiles in white, cream, gold, tan, red, brown, silver, green and also gray produce a cheerful style. Pair backsplash with a brown kitchen table for a dramatic accent or gold kitchen table for a warm accent.

Making Folding Dining Table

Home » kitchen

Folding dining table – Making the most of small spaces is what RV living is all about. One of the best ways to utilize the space is to build a folding table. It can give you counter space you need and then put aside when not in use. Measure the area where you want to place your folding table. The space should include a wall, because the table will fold against it. Transfer your measurements to the plywood, and then note the board, a square 4 inches smaller around than the original dimensions. This allows the space to get in and out from the table.

Cut the square out of plywood. Sand the edges. Cut two-by-two so that is 4 inches shorter than the width of the folding dining table. Add your tabletop to the floor against the wall and mark on the wall where the outer edges of the table (call this mark X). Put another mark where you want the top of your tabletop to be (Y).

12 Photos Gallery of: Making Folding Dining Table

Place a third mark 2-3 / 8 inches below this mark (brand X). Hold down two and two so it is level with the “Z” and its ends are 2 inches inside the outside tracks of your folding dining table (X). Attach the wood on the wall with wood screws and a drill. This is what your table top will rest on.

Stainless Steel Kitchen Sinks: Choosing The Best Materials

Home » kitchen

If you are look to buy stainless steel kitchen sinks there are some boring. But very important considerations that you need to investigate. Regardless of whether you’re looking for inset sink (which comes down to your work surface) or in the bottom of the mountain (or under the sink counter) you want to make sure time and money well invested.

In this article you will (quickly) to find what to look for when it comes to thickness stainless steel kitchen sinks (measured in gauge). Plus you’ll find more on the composition of the steel. It is usually measure with chromium and nickel content – key ‘ingredients’ that make stainless steel kitchen sink, stainless. There are many reasons to buy stainless steel than granite or ceramic sink. The first is the cost because you can get a lot of value only a few hunger dollars with a kitchen sink built. And second, they tend to chip and crack with daily use.

12 Photos Gallery of: Stainless Steel Kitchen Sinks: Choosing the Best Materials

Stainless steel kitchen sinks is usually made of steel 18/10 (that chromium to nickel ratio) and come in various thicknesses. While many retailers are talking about steel thickness is actually a measurement of weight per square foot. Steel thickness measured in measure with a lower number indicates a greater thickness. Thick sink material construction means you are less likely to sink warped, bent and dented with daily use.

 

Installing Kitchen Sink Faucets

Home » kitchen

Kitchen sink faucets – A good way to give an existing kitchen new life and appeal is to replace the sink and waste management. It may sound like a tough job, but it is relatively easy to do. Following these directions will help you get the job finish in record time. If you are replacing a sink, remove the existing sink and plumbing. For a new installation, installing hot and cold water supply and drainage pipes. Track sink template on the countertop with a pencil. Drill a hole through countertop by using a half-inch drill bit. Cut the hole for the sink with a jigsaw by cutting inside the traced line.

Install the kitchen sink faucets according to the installation instructions that come with the faucet before dropping into the sink hole. Additionally, place a bead of white silicone caulk along the edge of the hole before dropping into the sink hole. Then gently place the sink in the hole.

12 Photos Gallery of: Installing Kitchen Sink Faucets

Use the included mounting hardware to attach the sink to countertop. Be sure the kitchen sink faucets lined up in the right place before tightening the hardware. Place a final bead of caulk around the outer edge of the sink completely waterproof joint between the sink and countertop. Wipe off excess seal with a finger or a tight finishing tool.

Clean Bottom Copper Tea Kettle

Home » kitchen

Copper tea kettle – Copper is often forged to the bottom of tea kettles and cookware because it is durable and conducts heat well. The appearance of copper also adds charm and warmth to cookware. While tarnish does not affect the performance of a copper bottom tea kettle. Not reduce its aesthetic appeal. Clean copper after each use to keep it looking new, advises Michigan State University Extension, and dry thoroughly copper. Since moisture accelerates tarnishing process.

For the daily cleaning, please wash copper tea kettle in hot soapy water. Rinse in clean water. Then cut a lemon in half. Sprinkle 1 tablespoon of baking soda in lemon. Next, rub lemon over copper tea kettle bottom to make it shine. Last, rinse tea kettle again in clean water. And dry thoroughly with a soft cloth.  To removing tarnish: One, mix 1 tablespoon salt and 1 cup of vinegar in a large stockpot.

12 Photos Gallery of: Clean Bottom Copper Tea Kettle

Top Copper Tea KettleSize: 913 x 856

Simple Copper Tea KettleSize: 1024 x 768

Rome Copper Tea KettleSize: 800 x 600

Modern Copper Tea KettleSize: 1000 x 750

Cool Copper Tea KettleSize: 819 x 1024

Best Copper Tea KettleSize: 800 x 600

Two, place the copper tea kettle into the pot, and cover it with water. Boil for one hour. Last, wash the pan in hot soapy water. Rinse thoroughly and dry. Warning! Tips and Warnings: An alternative method of removing tarnish is: Mix 1 tsp. salt in a cup of white vinegar. Add enough flour to make a paste. Spread the mixture on copper, and wait 15 minutes to an hour. According to Michigan State University Extension. Rinse, wash and dry the pan. Avoid high heat to prevent tarnishing.