Wiring Lighted Make Up Mirror

Home » Hardware » Wiring Lighted Make Up Mirror

Lighted make up mirror – Makeup Mirrors usually have more than a light bulb above the mirror. A light bulb would cast shadows at an angle to the face. But several bulbs spread light and illuminate the face from all sides. Wiring multiple lights on a make-up mirror is a simple procedure that can be done in an hour or less.

Posted on December 29, 2017 Hardware

First wiring lighted make up mirror, place the outlet in the mirror in front of you on a workbench or desk. Loosen the screws on the sides of the bulb socket. Each tap has two parallel screws sticking out perpendicular to the base itself. Then, cut a string of 12-gauge wire about 6 inches long. Strip about a half inch from one end and put this in the outermost screw on the outlet to the outside position relative to the other terminals.

12 Photos Gallery of: Wiring Lighted Make Up Mirror

Lighted Make Up MirrorSize: 1024 x 768

Furthermore, wrap wire around the neck of the screw and tighten the screw head against the bare wire. Cutting a long strand of wire about a foot. Wrap and clamp it against the last remaining screw for lighted make up mirror. Let the other end of the wire dangle for a moment. Then, place the bare wire from the red insulated wire to the bare wire dangling from the beach, and with finger wrap the wires around each other.

RELATED TOPIC :   Installation Kohler Toilet Paper Holder